Modular Exhibition Display
   
 

A 6m x 4m custom build modular stand with three open sides. We've used a giant format fabric tensioned graphic to form the backdrop to three large plasma demo screens. Behind this structure is a secure exhibition stand store with porthole feature vision panel. Above this is a white casement fabric ceiling and directional Par Can exhibition stand lighting. A 3.6m high rear wall provide ample high level branding plus a recessed product display counter with overhead downlighters. A semi private meeting area is screened by semi transparent infill panels so that the stand retains its crisp open feel. A large curved reception desk to the front corner completes the layout. Although shown with a sub floor this stand would work just as well with carpet direct to hall floor.
 
 
 
 

A 6m x 6m custom build modular stand with three open sides, with high level impact branding to the entire 6m rear walling up to 3.9m high. A secure 3m x 1m stand store sits hidden behind one semi private meeting area, with an additional larger meeting area along side. This area is well lit using our own flood lights to the top beam. A central 3.6m high totem is used to give a front facing 42 inch plasma demo screen with a branded or information panel to the rear. A double sided computer workstation sits on each front corner and comprises each side of a RAL colour worktop of your choice, stabilising base which can have a curved locking door for access to PC equipment. A 3m high rear panel allows eye catching technical data or branding along with a wall mounted TFT demo screen.
 
 
 
 

A 3m x 4m custom build modular stand with three open sides. This layout comprises a 3m high rear wall for high impact imagery and support branding, a shelving wall to each end and small storage access cupboard behind. A supported ceiling links the rear wall to the front of the stand, from which is suspended an attractive acylic logo panel with rounded corners. Below this high level branding sits a display case with open access shelving. As an optional extra this display case can have acrylic infill panels to stop access to any valuable product on display if required. Our custom build modular exhibition stand design is finished off with a sub floor and two different floor coverings to add extra interest to your floor space.
 
 
 
 

A 4m x 4m custom build modular stand with three open sides. This stand offers two semi private demonstration zones with high stools. Three technical data panels are spaced off the hidden store walling. A white casement ceiling structure flies over the demo zones which could have a company logo or imagery printed to it. The left side of the stand is accessible through a open section of the 3.6m high double sided branded walling. The outside face of the front corner totem wall, displays a 42 inch plasma screen mounted directly to the stand walling to run a corporate video or demo presentation. This stand utilises a 40mm high sub floor and two different finish floor coverings.
 
 
 
 
 
     
 
 
 
 
Make Enquiry | Careers | Our Company
Oakmond Limited . lagos, Abuja, Port-Harcourt - Nigeria
Telephone: 234-1-8535040, 234-8033150209 Fax: 234-1-5894281 - email: support@oakmond.com
Copyright 2011 Oakmond Limited - Company Registered in Nigeria
Company registered office: Suite C1, Water Front Plaza 1st Avenue, Opposite Mr Biggs Festac Town Lagos